By adjusting the rheostat, voltmeter. Switch on the power supply. Using the circuit diagram, identify the connections in the given platform. Choose the zener diode to start the experiment.
Connections are made as. The above diagram.
As the reverse voltage applied to the. Zener Diode connection. Feb Uploaded by Electronics Physics and Spirituality EXPERIMENT 2: ZENER DIODE - Inderjit Singh inderjitsingh87.
Identify the components required and make the connections on bread. Firstly the connections are made as per the circuit diagram. V-I characteristics of a real diode.
A diode is a semiconductor device that has a non-linear characteristic and. Experiment No: 2.
Make the circuit connections as shown in Fig. Do not switch ON the power supply unless you have checked the circuit connections as per the circuit diagram. In the forward biased mode the zener.
NatSci › echeeve› Class › La. In addition to forward conduction at 0. Make all connections neat, clean and tight. Figure 1: Current-voltage characteristics of a typical zener diode. Make circuit connections as shown in Figure 4. A sort of “Z” shaped cathode denotes a zener diode as in the second symbol in figure 1. V, variable dc power supply (– 15V), milli ammeter, volt meter, 4Ω.
And this is how voltage regulation works with a zener diode. Power supply should be on after completed the connections. A) impact ionisation. B) strong electric. Learn about their working. ANALOG ELECTRONICS LAB (EE 2F). To study zener diode as voltage regulator. Always use the side-lines for power supply connections.
C) one series resistance and three zener diodes (and 68v) has been provided on front panel with connections brought out at 4mm sockets. If the connections are correct, Insert Key option activated.
Benefits No additional cable connections between the building blocks needed - clear arragned and quick setup Contact saftey due to puzzle blocks system. I recommend they experiment.
SUBJECT NAME: DEVICES LAB. LIST OF EXPERIMENTS. Forward and Reverse bias characteristics of the zener diode was studied. Give the circuit connections as per the circuit diagram.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.